The following RFQ is based on our client’s need. Please provide your monthly metric tonnage capability and Pricing. We would like to be able to start with 150 metric tons per month if possible , with an aggressive ramp up schedule to be determined, eventually arriving at greater tonnage (1000-5000 metric tons/month) this may be a multi-year contract. The PET only material must be: FLAKE, PELLET, CHIP, OR LUMP. Once a specific material is determined by the supplier and agreed upon by the customer it cannot be changed. Each container shall be the same agreed upon material and shall be accompanied by a material certification, certifying that the material within each container meets the below specification. The material must be clean and free of debris. Material type, material form, and/or color cannot be mixed in any container and all containers must be the agreed upon material form. It is imperative that the monthly quantities be met as required by the customer. There shall be a scheduled ramp up provision to provide sufficient time to arrange for higher volumes which will be determined by the customer and agreed upon by the supplier. The pricing must be aggressive due to the needed increased volumes and possible addition of other materials to be released at a later date. There will be an agreed upon minimum annual quantity purchase agreement by the customer. Pictures of the proposed material are needed ASAP. A 5-10 pound sample must be sent to the address below once a proposed material form and an agreement is arrived at with the supplier. This contract shall be given to the supplier that can deliver.
Please advise ASAP price and pictures for PET material only.
Note: If you are interested in this business please e-mail the requested information including a contact person’s name that can be contacted both by phone (include the number) and an active e-mail address which someone will actually answer. If not interested, please reply with a not interested e-mail.
Thank you for considering our proposed new business.
SAMPLE: SEND 5-10 POUNDS OF PROPOSED MATERIAL TO:
906 BING COURT
BOILING SPRINGS, SC
PET Material Specs and requirement
Material Name: polyethylene terephthalate (PET)
Commodity: 100 PCT Polyester CHIPS, FLAKE, PELLET, FIBRE, OR LUMP
Grade: B, C, Off Grade, or waste
Quantity: 150 metric Tons/Month, to be increased as agreed upon
inherent viscosity: 0.64-0.65, max: 0.7
melting point: 258 degrees
40 foot containers are ok to ship with, 20 foot is also ok
Destination: Qingdao or Ningbo Port of China
Samples AND pictures needed urgently