UK scrap prices
The prices that you are viewing are two months old prices. Latest prices along with
price archive and price comparison features are available only to subscribers.
If you have Entire Scrap Price/Ultimate Membership/UK prices/Scrap prices
Click the below scrap materials for detailed price with advanced graph and historic
index. You can select the date range for the desired period of time and compare
for the selected material.
UK Scrap Prices
HMS stands for Heavy melting scrap. HMS1 refers to the heavier scrap which cannot be galvanized. It has the density of 0.6 cm3. HMS2 refers to the lighter scrap and it can be galvanized. The size of more..
Scrap is a material which can be recycled and used again. As the name indicates it refers to the scrap which shredded down while cutting any material.
Copper #1 grade applies to clean copper scrap such as copper bush bars, copper clippings, copper tubings and copper wire not less than 1/16 inches thick.
Copper #2 grades applies to the dirty version of its cousin #1 which may consist of unalloyed copper scrap with not less than 94% copper and free from lead, tin, soldered copper scrap, brass or more..
Copper No#3 is also referred as light copper and generally gets a lower rate compared to the other 2 copper classifications. The size of Copper # scrap is less than 1/16 inches thick. Thin wires and more..
Clean UBCs refers to Used Beverage cans. Most preferably it can be made up of aluminum. It is free from the impurities such as lead, foil or other foreign materials. It can be compressed into bales more..
Aluminum consists of clean aluminum and the extrusion is made by any one of the alloy. The alloy may be zinc, stainless steel or iron. It is light weight strong and high corrosion resistant. Normally more..
Aluminum radiators are made with well finished 100% pure aluminum piece with copper. Aluminum is 40-50% light weighted metal when compared to other metals. Aluminum is highly corrosion resistant. It more..
Al-Extrusion Scrap is generated during the process of Aluminum Extrusion. Normally it is free from contamination of zinc, iron, dirt or other foreign particles.
Litho plates are a kind of perforated plates made up of aluminum. It is used in the printing industry to make a consistency of images. Litho plates are undergone to some chemical reaction to accept more..
An aluminum radiator consists of 100% of aluminum and it dissipates heat from the atmosphere. Aluminum radiators use 1 wider tube that makes the contact area wider, this helps to transfer the heat more..
Aluminum turnings are referred to the material components which are shredded down during the machinery process or cutting process of the aluminum components. It can occur at lower price.
It refers to cast aluminum, a kind of metal. It is used to make a cook ware and to create outdoor furniture. In addition to these it is also used in motor parts. Methods such as mold casting and die more..
It is also known as austenitic stainless steel. It is not magnetic. It has an austenitic crystalline structure, which is a face-centered cubic crystal structure. The corrosion resistance is higher more..
ACSR stands for aluminum conductor steel reinforced cable. It has the excellent conductivity of electricity so it is used as power cables to transfer electricity. It also used as primary and more..
It is a thick copper which can be used to strip wire which is protected by insulation. It is a hydraulically compacted material. It contains uncoated, unalloyed copper wire.
It is also called as plain carbon steel. It is less ductile. When it is heated, it becomes harder and stronger so that welding seems to be difficult.
It is like a radiator device which is used in vehicle cabin. It is used to transfer heat from coolant to the cabin. There is a wide range of materials made with copper used in variety of more..
Since coppers are the good in transferring heat and electricity, it is used as radiators. It is capable of exchanging heat from atmosphere. It is used in air conditioners and air coolers.
Hard brass is a kind of metal which is softer than steel. In this the copper content is greater than 75%, lead and tin content is greater than 6% or more than 11% and also it contains other more..
Hard lead is an alloy which contains more impurities and 5% of antimony. Since hard lead is very toxic, it can affect the human health due to the contamination of drinking water.
It is the process of stripping the electrical insulation from the electric cable. This process is mainly used for recovering the lead which is additionally processed.
It is a mixture of copper and zinc, which is an alloy of good corrosion resistance. The corrosion resistance is because of the hardness and enthusiast properties of the alloy. Since it resists more..
It is referred to “Copper alloys”. It contains copper, tin and zinc. It is resistant to corrosion and it is used as hydraulic castings, valves and gears. It has the composition of 85% copper, 5% more..
Soft lead is used for the process of softening the metal which contains no impurities. It is also called alternative leads or feature leads. It is soft and malleable.
As the name refers this denotes the batteries which are used in auto mobiles. It can be rechargeable. It is used to start the motor and it consists of six cells each with 12V charge.
Yellow brass consists of 33% of zinc and 67% of zinc. The color of the brass depends on the amount of zinc added to the brass. It is used in automobile industry, measurement instruments etc.